TCGE-0524-IR00
Drawing Hydraulic symbol
Pressure drop
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
www.eltfluid.com
For general conditions and terms of use see page S.005.
This document is Elt Fluid property and therefore data or technical specification can
not be reproduced.
Eltfluid also reserves the right to modify all the above data, at any time.
Drawing
Performance graph
Electric valve
Performance graph
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
1.18.001.1
TECHNICAL DATA
HYDRAULIC
Max. working pressure: 250 bar (3.625 psi)
Flow rate: See performance graph
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Leakage: 200 cc/min
P max. 210 bar (3.045 psi)
Standard seals: O-ring NBR Seals Polyurethane
Cavity: SCN0850
Installation torque: 27 Nm
Coil nut torque: 2 Nm
Max contamination level: NAS 8 ISO 4406 19/17/14
Fluid temperature range: From -20 °C to +80 °C
Seal kit std.: 5AG0045
ELECTRIC
Type of voltage: DC
Insulation index: H
Nominal voltage: +/- 10 %
Power at 20 °C: 20,5 W
ED*: 100% with ambient temperature range -20 °C +40 °C
Coil code:
(see page 9.01.002)
S130-20S
*Note: For temperature or special conditions contact our sales department.
E08N-5M
Solenoid valve 5 ways 3 positions,
direct acting spool type Closed Center
Description
Electric cartridge valve on/off, spool type, 5 ways, 3 positions, with
integrated load-sense port and closed center spool.
Operation mode
A spring holds the spool in center position so that the oil flow is
stopped in all ports while ports 3 is connected to 1.
When solenoid S1 is energized the spool is pulled to allow flow from
5 to 2 and from 4 to 3.
When solenoid S2 is energized the spool is shifted (pushed)
to allow flow from 5 to 4 and from 2 to 3. Load sense port 1 is
connected to port 5 when spool is shifted.
GENERAL DATA
Weight without coil: 0,19 Kg (0,42 lbs).
Ambient temperature range: -30 °C a 60 °C with standard seals (NBR).
Max. proof pressure ports 1-2-3-4: 300 bar (4.350 psi).
Flow Max: 13 l/min (3,5 gpm).
Cartridge materials: high strength steel, internal parts hardened
and grinding.
S2
4
5
3
2
1
S1
0
5
10
15
20
25
024681012
0
50
100
150
200
250
300
350
0123
Pressure
bar
psi
Flow gpm
lpm
Flow
5 to 2
Flow
4 to 3
Flow
2 to 3
Flow
5 to 4
0
50
100
150
200
250
300
0 5 10 15
0
1000
2000
3000
4000
0123
Pressure
bar
psi
Flow gpm
lpm
Coil S2
Energized
Coil S1
Energized
TCGE-0524-IR00
*Note: Information about manual
override is available at page S.001
Ordering code
Elt Fluid S.r.l.
Via Ganapini, 15/2
Loc. Felina 42035
Castelnovo ne’ Monti (RE) ITALY
mail: info@eltfluid.com
P.IVA/C.F 02573790355
STANDARD HOUSING
Ordering code: See page 9.02.006
Material*: Aluminium/Steel
Max working pressure for aluminum body: 210 bar
Max working pressure for steel body: 350 bar
*Note: To correctly select the material, in relation to application, see page S.003.
Voltage
Seals
DN- Din
DU- Deutsch
AM- Amp Junior
2B- 1/4” BSP
3B- 3/8” BSP
2S- SAE 6
3S- SAE 8
24- Vdc
12- Vdc
Connector
None (std. without coil)
None (std. without override
)
Options*
None (std. only cartridge)
Housing size ports
A- Aluminium
Material std. housing
S- Steel
None (std. NBR+Polyurethane)
Y- Polyurethane
For other options
contact Sales dept.
Inches
Millimeters
-
-
Dimensions
PP- Push&Pull
1.18.001.2
E08N-5M
E08N-5M

























81)$














+H[
6
6








6
6